Search Messages

 
Author:
Search Start Date:
Search End Date:
Sort Order
Sources to include:
OR Message ID:
 

Display Mesage #110362


final drive
Written by bigphillip79 on 2/3/2012 at 11:42 pm

1- 2004 Shadow Sabre, VT1100C2.

2- All that is need is the Final drive, just the pumpkin. The dust guard (part 7
in the parts schematic) and the collar spacer thing (part 8) is all I needed to
swap over.

3- The VT1100 drive shaft and swing arm are 2-3 inches too short to use on the
PC. Just get the Final Drive.

--- In ipcrc@yahoogroups.com, "douglasvanb" <douglas.vanbossuyt@...> wrote:
>
> Here is what I threw together this evening:
>
>
http://www.douglasvanbossuyt.com/2012/02/02/final-drive-options-for-the-honda-pc\
800-pacific-coast/

>
> I still have three questions for people who have swapped in VT1100 final
drives they are:
>
> 1) Which exact model of VT1100 final drive did you successfully swap in?
There are five candidate final drives used across the different models and
years.
>
> 2) What pieces transferred over from the VT1100 final drives and which ones
were reused from the PC800 final drive?
>
> 3) Are people only buying the VT1100 final drive or the whole rear-end (final
drive, swingarm, wheel, misc pieces, etc) to swap into their PC800s?
>
> If anyone who has done this conversion could answer these three questions (and
provide any other relevant details), I would be GREATLY appreciative. I will
update the page I linked to above as I find out more information.
>
> Thank you everyone! Let's get these questions answered and we can finally say
we have fully answered the questions surrounding the VT1100 final drive swap.
>
> Cheers,
>
> Dougals
>
> --- In ipcrc@yahoogroups.com, "douglasvanb" <douglas.vanbossuyt@> wrote:
> >
> > Thanks HWB/Big Phillip!
> >
> > I am working on putting together a spreadsheet to lay out all of the options
and differences. Hopefully in another hour I'll get all the formatting sorted
out and have a link for everyone to look at :-)
> >
> > ...I wonder if we could change the ratios in our secondary drives...
> >
> > Cheers!
> >
> > Douglas
> >
> > --- In ipcrc@yahoogroups.com, "Hungry White Boy" <bigphillip79@> wrote:
> > >
> > >
> > > I did a little research and the final drive ratios in VT1100s are the
same. The secondary drive that puts power to the drive shaft has different
rations between models.
> > >
> >
>

Message Thread for message #110362