Search Messages

 
Author:
Search Start Date:
Search End Date:
Sort Order
Sources to include:
OR Message ID:
 

Display Mesage #100651


Fuel smell source
Written by douglasvanb on 2/11/2011 at 08:15 pm

Hi Stan,

Yup, that's the Christmas tree thing. Something in your carbs probably isn't
right. In the files section there is a guide to rebuilding/servicing carbs.
Try doing a tear-down and look for pin-holes or cracks/tears in the various
diaphragms and O-rings. At least that's my 0.02 USD.

Cheers,

Douglas

--- In ipcrc@yahoogroups.com, "STANLEY" <stanwalton@...> wrote:
>
>
> Hello,
> I've just posted a photo on the photo section of the forum relating to the
discription of the "fuel smell source" in my original post.. I hope this sheds
light on the question posed..
>
> The smal picture insert at the lower left of the larger picture shows the
plastic tube which I think is the source of the order but not necessarily the
orgin of the odor..
>
> Hopefully someone recognizes and can help with this problem.
>
> Thanks,
> Stan
> --- In ipcrc@yahoogroups.com, "Phillip Boyd" <phillip.g.boyd@> wrote:
> >
> > Stan,
> >
> > Navigate to the Photo Album you created here on the forum, then at the right
top of your screen select Add Photo - then click on the Select Files icon bar.
You'll see the familiar Windows file selection pop-up and should be able to
navigate to the picture of the part you are asking about.
> >
> > Phil
> > Northern VA
> >
> > --- In ipcrc@yahoogroups.com, "STANLEY" <stanwalton@> wrote:
> > >
> > > Hello,
> > >
> > > Several people offered information conscerning the source of fuel smell on
my PC800 (1997 model-16Kmiles).
> > > I've checked the petcock (I've a re-build kit on order), tightened the
screws but detected no leak or odor..
> > >
> > > After changing the air filter, I discovered a connection that appears to
be the source of the leak.. I have a picture but I don't know where to post it..
> > >
> > > If anyone has knowledge about this subject, and if you would tell me where
to send the picture, it would be most helpful if you could comment on the
function/nature of this plastic tube.
> > >
> > > Refering to my Honda shop manual(page 5-6 of the 1989-1998 copy), I can
not find the name or function of the part which appears to be part of the vacuum
system. It is approximately 3/8 inch in diameter and black plastic tube.. It has
oil/fuel residue on the surface.
> > >
> > > Please pardon the unprofessional description.
> > >
> > > Thanks,
> > > Stan
> > >
> >
>

Message Thread for message #100651