Honda Pacific Coast ipcrc Archives

Title and Body Title Only	All Words Any Word Phrase
Author:
Search Start Date:
Search End Date:
Sort Order	Newest Posts First Oldest Posts First
Sources to include:	Both Yahoo Groups and List Server Only Yahoo Groups Only Older List Server
OR Message ID:

Shark Radio?
Written by rvicke on 4/15/2011 at 02:15 am

Thanks very much for the info on the accessory plug....that's the one I found on
the wiring diagram...Red full on, Blue/Black ignition on (I'm assuming), and
Green ground......

I received the system today, and pulled the speaker cover off the PC...the
speakers included are 2 1/2 inch, and the mounting on the PC looks like 4
inch....did you use the enclosed speakers, and if so, how did you mount them?
The speaker mounts look very weak too, if using 4" speakers.

And, then, I was expecting the speaker hole covers to be pop-out, but they are
all one piece...I noticed someone else had the speaker hole covers open, and
mesh ran across the back of the speaker hole. I guess I will have to cut that
out....

Lot more work than I had anticipated on the speakers...

Rick

--- In ipcrc@yahoogroups.com, "dave_hiett" <dehiett@...> wrote:
>
> Rick - PC has an accessory plug under the seat, and that's where I went. I
hooked red from the radio to the red wire in the plug (always on), and the
ground to the green wire there. Both wires were long enough to reach without
adding anything.
>
> I threaded the remote up under the shelter, then cut a small notch under the
handlebar plastic. There's a picture in the files of that notch. Works very
well.
>
> Yesterday it wouldn't turn on, so I checked the amp's in-line fuse. It was
fine. When I put the fuse back in, it started right up. Guess it needs a little
dielectric grease there...
>
> Let me know if I can help further.
>
> Dave Hiett
>
> --- In ipcrc@yahoogroups.com, "Rick" <rvicke@> wrote:
> >
> > Actually, with the headunit in the trunk, a display doesn't give you
much....the one I ordered is the same you have.....
> >
> > Ok, now that I found someone who has added one, where the heck did you plug
in the power wire from the amp?
> >
> > Looking at the wiring diagram, there seems to be an 'other' connector close
to the starter relay....did you use that connection (on the radiator fan circuit
(10 amps)?
> >
> > This and the location of the remote (plan to put on right side too)
wiring...how to get it in there in such a way it doesn't impede turning....
> >
> > Well, hopefully by Sunday, I have tunes.
> >
> > Rick
> >
> > PS: I use an HD receiver in my car, and will really miss HD....so I'm
keeping my eyes open for something to make this work HD...
> >
>