MUFFLER BLEEP NOISEWritten by spacetiger_j... on 6/1/2011 at 11:57 pmYou are required to take pics and to post them so the next person can do this
too.
Although I have not done this, if I was, I would put the muffler in a band saw
to cut as precise a straight cut at the back, make the mods internally, then
weld her back up.
Jerry
--- In
ipcrc@yahoogroups.com, Israel Engle <israel_96gtp@...> wrote:
>
> I resolved the problem on my last PC. What I found was the inner baffle had
> welds sticking off the outer circumference, ultimately wearing through the
> fiberglass batting (or the fiberglass shrinking due to age/heat/wear), and the
> baffle would rattle/squeak against the outer can. The only way to resolve is
to
> cut the can open, grind down the welds, make sure you have clearance, and weld
> it all back together again.
>
> Or just learn to love the fweem.
> Iz
>
>
>
>
> ----- Original Message ----
> From: C172myP51 <c172myp51@...>
> To:
ipcrc@yahoogroups.com> Sent: Wed, June 1, 2011 3:36:11 PM
> Subject: PC800: Re: MUFFLER BLEEP NOISE
>
> The guy that was just selling his totaled 96 on here a week or two ago said
he'd
> fixed his muffler. Check for those posts, and email him. Let us know what you
> find out, cuz it's a real PITA.
> -Scott
>