PC Brake RotorsWritten by spacetiger_j... on 6/4/2011 at 08:23 pmJeff,
A few things to consider:
1. Honda OEM (PC800)
Used or mail order (don't buy local as there over the counter costs are HIGH!)
2. Honda OEM (from other bikes)
You have 2 possibilities, stay with the stock 276mm discs or upgrade to 296mm
discs. There are lots of Honda bikes that used the 276mm discs:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=190279400880&ssPag\
eName=STRK:MEWAX:IThttp://cgi.ebay.com/ebaymotors/V45-Sabre-CB650SC-Nighthawk-Left-Front-Brake-Roto\
r-/360012265696?pt=Motorcycles_Parts_Accessories&hash=item53d26738e0I would suggest you consider going to 296mm discs; lots of options and an easy
bolt in operation:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=200380494763&ssPag\
eName=STRK:MEWAX:IThttp://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=170649991015&ssPag\
eName=STRK:MEWAX:ITYou just need different front caliper brackets (here is a complete setup, you
just need the brackets, you can use your current calipers or the whole setup:
http://cgi.ebay.com/ebaymotors/91-HONDA-ST1100-ST-1100-LEFT-RIGHT-FRONT-BRAKE-CA\
LIPER-/350390462300?pt=Motorcycles_Parts_Accessories&hash=item5194e6275cI think the older VFR750 model caliper brackets would work:
http://cgi.ebay.com/ebaymotors/Honda-VFR-VFR750-VFR700-Front-Brake-Calipers-1986\
-IBK-/400131269511?pt=Motorcycles_Parts_Accessories&hash=item5d29aea3873. Aftermarket
276mm:
http://cgi.ebay.com/ebaymotors/Front-Brake-Disc-Rotor-Honda-CBR-F600-VFR-750-100\
0-/260775540940?pt=Motorcycles_Parts_Accessories&hash=item3cb76ef8cc296mm:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=190481073949&ssPag\
eName=STRK:MEWAX:ITJerry
--- In
ipcrc@yahoogroups.com, "goldwingman40" <goldwingman@...> wrote:
>
> Jeff,
> Most of the other than OEM honda brake rotors and pads don't work any near as
well as the OEM. You might keep looking on ebay to find a set of rotors from a
lower mileage bike being parted out or bite the bullet and spend the little
extra to get the new OEM rotors but by all means only use OEM pads, they give
you the best stopping with little rotor wear. Many of the aftermarket tear up
the rotors bad.
> Fred
>
>
>
>
>
> --- In
ipcrc@yahoogroups.com, "sc00terdog" <fourquarter@> wrote:
> >
> > Greetings all. I have a 1998 PC with 78320 miles on the odometer. The
brakes work well, but lately I've noticed a mid-frequency squeal from the front
brake at low speed, just before coming to a dead stop. Today I took the brakes
apart. The pads look good, but the rotors have a noticable wear ridge, and they
measure 4.05mm - 4.1mm thickness, which is just over the wear limit of 4.00mm.
> >
> > OK, so I need new rotors and caliper pins. Service Honda wants $196.30 each
for the rotors, OUCH! Bike Bandit carries EBC Pro-Lite Brake Rotors for
$157.39.
> >
> > My questions for the group:
> > 1) Does anyone have experience with the EBC Pro-Lite Brake rotors?
> > 2) Are there other aftermarket rotors available that fit the PC? If so,
what is your assessment of these rotors?
> >
> > Thanks for sharing your experience.
> > Jeff Johnson
> > 1998 PC "Concubine"
> > 1998 VFR "Wench"
> >
>