Honda Pacific Coast ipcrc Archives

Title and Body Title Only	All Words Any Word Phrase
Author:
Search Start Date:
Search End Date:
Sort Order	Newest Posts First Oldest Posts First
Sources to include:	Both Yahoo Groups and List Server Only Yahoo Groups Only Older List Server
OR Message ID:

MUFFLER CHIRP / TWEET FIXED FOR UNDER $5 IN 1/2 HOUR
Written by spacetiger_j... on 6/26/2011 at 02:12 pm

Is this like taking the mattress tag off?

:-)

--- In ipcrc@yahoogroups.com, "Phil" <phillip.g.boyd@...> wrote:
>
> You do know you just voided your warranty? Glad it worked out for you.
>
> Phil
>
> --- In ipcrc@yahoogroups.com, "jpadaneye" <jpadaneye@> wrote:
> >
> > Thats right!......I bought 3 stainless steel carriage bolts from Home Depot
(1/4 inch diameter and 4" long) with nylon lock nuts and washers. I removed the
chrome shield and then drilled 3 holes right through the damn thing. I put the
bolts through and tightened the nuts. Chirp noise is gone, completely gone!
> >
> > I drilled through the center line of the pipe. Right through everthing. I
did the first one in the center of the pipe's lenght and it did not fix it. So I
put 2 more on each end (about and 1 1/4" from the welds) lenthwise. That worked.
So you could try the end ones first or one at a time or just do three, like me.
I dont think the angle mattered, but I drilled at about 30 degrees ish from
outside to inside with the outside being higher. I only chose that angle because
it was easy to drill and the nuts wound not line up with anything and could
easily be tightened.
> >
> > Super easy, no picture needed but if you want to see, text me and I can send
you one from my phone. 508-735-5567
> >
> > AND....yes it sounds great, like a motorcycle, not a 72 VW beetle. You can
actualy accelerate in public with out feeling like you are on a Jetson
spacecraft! Good luck! Jim Padeni
> >
>