MUFFLER CHIRP / TWEET FIXED FOR UNDER $5 IN 1/2 HOURWritten by israel_96gtp on 6/27/2011 at 08:49 pmIts all a guess, I would think that if you dented the can in 1/2" a few
places around (3 places around the circumference midway down the length),
that it would certainly help.
--------------------------------------------------
From: "Gib" <
gibinmich@...>
Sent: Monday, June 27, 2011 4:07 PM
To: <
ipcrc@yahoogroups.com>
Subject: PC800: Re: MUFFLER CHIRP / TWEET FIXED FOR UNDER $5 IN 1/2 HOUR
> Maybe a few love taps with a hammer would eradicate the tweep also?
> Someone besides myself should try it and see if it helps? Israel, where
> would be a good spot on the muffler to start hammering?
>
> --- In
ipcrc@yahoogroups.com, Israel Engle <israel_96gtp@...> wrote:
>>
>> As I found out from experimenting on my last PC, I found that the weld
>> joints on
>> the inner baffle were squeaking against the outer can. Running some
>> bolts
>> through the middle would serve to squish it all together, thereby
>> removing the
>> ability for it to vibrate and squeak.
>>
>>
>>
>>
>> ----- Original Message ----
>> From: David <david.dockstader@...>
>> To:
ipcrc@yahoogroups.com>> Sent: Mon, June 27, 2011 12:18:33 PM
>> Subject: PC800: Re: MUFFLER CHIRP / TWEET FIXED FOR UNDER $5 IN 1/2 HOUR
>>
>> I thought he said he removed the shield and then drilled the holes, so
>> the holes
>> and bolts do not go through the shield and the shield is not the problem.
>> It is
>> not exactly clear to me what drilling holes throught the muffler and then
>> putting bolts through them actually does to change the muffler, but if it
>> works
>> and makes people happy I guess it is ok.
>>
>
>
>
>
> ------------------------------------
>
> The iPCRC humor and jokes subgroup :-)
http://ipcrchumor.piloot.com> In Memory of Christoffer Carstanjen
>
http://pjbt.home.comcast.net/christoffercarstanjen.htm>
> Post messages to:
ipcrc@yahoogroups.com> Message settings (digest/web/email etc) and (un)subscribing:
>
http://www.pc800.net> For problems and questions, send an email to:
>
ipcrc-owner@yahoogroups.com> Unsubscribe:
ipcrc-unsubscribe@...! Groups Links
>
>
>