Honda Pacific Coast ipcrc Archives

Title and Body Title Only	All Words Any Word Phrase
Author:
Search Start Date:
Search End Date:
Sort Order	Newest Posts First Oldest Posts First
Sources to include:	Both Yahoo Groups and List Server Only Yahoo Groups Only Older List Server
OR Message ID:

Photos - Cheap Givi mount/ luggage rack
Written by gibinmich on 7/7/2011 at 02:09 pm

While your homemade doesn't bounce, my factory Givi rack and box does bounce
around a little bit.

--- In ipcrc@yahoogroups.com, "docpolycarp" <bjkdig@...> wrote:
>
> I've been watching the Givi trunk in my rear view mirror while riding. There
is no bounce or movement on the road. It seems to rest on the duckbill without
movement even when empty. (Before I added the polypro bridge I put on the
underside of the rack where it contacts the duckbill it bounced up and down a
lot.)
>
> I do have Neoprene (Spenco) material, so I think I'll attach some to the
bottom of the polypro bridge I put on the underside of the rack where it
contacts the duckbill. That should further dampen any movement.
>
> When I had the seat off working on the backrest frame, I noticed there is no
frame tubing under the duckbill. Fabricating something to extend from where the
frame tubing ends to the rear inside end of the duckbill would be beyond my
technical ability, I'm afraid.
>
> Brian
>
> --- In ipcrc@yahoogroups.com, "Jerry" <sanae.ej@> wrote:
> >
> > Yes, I noted this is a danger of going down this route.
> >
> > I have brought up the top trunk frame from the lake house. I will post s
pick so you can see it would be easy to add some structural mounts to this frame
to the underside of the rear plastic tail. This would allow you to mate to the
tail safely.
> >
> > Jerry
> >
> > --- In ipcrc@yahoogroups.com, Juan Antonio Goula <juang@> wrote:
> > >
> > >
> > > On Jul 6, 2011, at 09:54 , Jerry wrote:
> > >
> > > > Brian,
> > > >
> > > > I think you might be the 1st to work something up that [sort of] ties to
the tail - it is not a solid tie, but takes advantage of that perch.
> > > >
> > > > I think you can tie into the upper trunk lid frame for a stronger
mechanical connection, but I like what you did, especially for the $'s.
> > > >
> > >
> > >
> > > Ok, here's the devil's advocate version? I'd be wary of cracking the duck
tail with vibration or bouncing up and down of the loaded bag, since it is not a
structural piece, merely a plastic shell. Could you slide a layer of thick
neoprene or some other shock absorption material to help prevent this?
> > >
> > > Good luck!
> > >
> > >
> > >
> > > Juan Goula
> > > Fairbanks, Alaska
>