Search Messages

 
Author:
Search Start Date:
Search End Date:
Sort Order
Sources to include:
OR Message ID:
 

Display Mesage #111900


Re: Valve Stems
Written by pogomann2002 on 4/2/2012 at 11:24 pm


Four of us! LOL
--- In ipcrc@yahoogroups.com, "Leland C. Sheppard" <lcshepp@...> wrote:
>
> Hi Clay,
>
> You wrote:
>
> "It wouldn't be at all expensive to do it on the bike as well,
> especially now
> that there are at least two of us (including me) who've had them fail."
>
> Three of us.
>
> Cost me $18.81 for a pair of PC valve stems from Service Honda. I think
> I will just inspect mine...
>
> --
> Leland
> Placerville, California, USA
>
> '94 Pacific Coast, "Black Beauty", 163000 miles
> '89 Pacific Coast, "Shadow Dancer", 41000 miles
> iPCRC #72
>
> PC800 Owner's Registry: http://www.pc800registry.org
>
> Mother of all PC800 Web Site Lists: http://www.pc800links.net
>
> 2001 PC800 Pacific Coast Ride: http://www.pcpch.org
>
> Complete PC800 Parts List: http://www.pc800parts.org
>
> PC800 Buy/Sell Registry:
> http://www.directcon.net/lcshepp/PC800BuySell.html
>
> A PC800 Trailering solution:
> http://www.directcon.net/lcshepp/PC800Trailering_with_CD.html
>

Message Thread for message #111900

lcshepp
7/21/2001, 07:48 pm
Re: Valve Stems
Hi Clay, You wrote: "It wouldn't be at all expensive to do it on the bike as well, especially now that there are at least two of us (including me) who've had them fail." Three of us. Cost me $18.81 for a pai

    lcshepp
    7/21/2001, 07:55 pm
    Re: Valve Stems
    Hi Rick, You wrote: " Were the valve stem reatainers in place when the stems failed? retainer = little plastic piece that goes from the wheel to the valve stem after the 90deg turn. How did the valve stems fail?"

    lcshepp
    7/21/2001, 07:58 pm
    Re: Valve Stems
    Hi Clay, You wrote: "I thought that the missing retainer contributed to the failure, until I replaced it, and discovered that if it had been there it may have made the problem worse with the way it pulls the valve down towa

    rudyg1937
    4/1/2012, 07:36 pm
    Re: Valve Stems
    I just changed my rear tire, due to another nail, and I changed out the OEM Honda valve stem to an angled metal stem. I had done this before on my other 98 and had to point the valve stem to the left to clear the protrusion on the rim that su

    pogomann2002
    4/2/2012, 11:24 pm
    Re: Valve Stems
    Four of us! LOL --- In ipcrc@yahoogroups.com, "Leland C. Sheppard" <lcshepp@...> wrote: > >