Display Mesage #127590
Re: Highway bar setup info
Written by cmaefs on 8/16/2014 at 12:00 am
I installed the pegs. The clamp I mentioned in the previous message are not Kuryakyn and had to be modified. About 1 hour with the grinder fixed this. I rounded the free end of the clamp and drilled (widened the bolt hole) 1/2" hole for the bolt. It all worked well and I was able to get the clamp to seat correctly in the Kuryakyn Long Right Angle Mounts. The plastic did not need to be cut but the fit is very tight.