Search Messages

 
Author:
Search Start Date:
Search End Date:
Sort Order
Sources to include:
OR Message ID:
 

Display Mesage #71045


PC800 Clutch Springs
Written by eraffrenato on 5/24/2007 at 03:06 pm

Hi all,

I would like to buy a used wind screen for my '96 PC. Do you have by any
chance one that you don't use? (even if scratched)
Thanks,

Emiliano

Message Thread for message #71045

Eugene_Elder
5/24/2007, 03:37 am
PC800 Clutch Springs
What brand of Clutch Springs should I buy and where on line can I purchase them? Euene

    rwven6956
    5/24/2007, 10:59 am
    PC800 Clutch Springs
    You have a few options. One is to order Honda replacements from Service Honda http://www.servicehonda.com/hard%20parts/hard_parts.htm. Or you could go to your local indep

    rwven6956
    5/24/2007, 11:18 am
    PC800 Clutch Springs
    Clutch Springs I used: I bought them MSC Indudtrial Supply, not McMaster-Carr http://www1.mscdirect.com Part # 00603811 They are $5.45 each (You will need 5) Ron --- In

    jwswingle
    5/24/2007, 12:23 pm
    PC800 Clutch Springs
    While on clutch, any suggestions on best replacement clutch itself?? or is my slippage at 68k miles probably tired springs?? It does hook up, it just is too easy to slip it; even a sudden full throttle in 5th at highway speed will cause a sli

      rwven6956
      5/24/2007, 12:40 pm
      PC800 Clutch Springs
      -Probably just the springs as the stock ones are rather wimpy. Mine was slipping pretty badly by the time I changed the springs, but the clutch discs were fine. Ron -- In

        goldwingman40
        5/24/2007, 02:34 pm
        PC800 Clutch Springs
        Ron, How many miles and how long since you changed to hte new s.s. springs. Fred --- In ipcrc@yahoogroups.com, "

          rwven6956
          5/24/2007, 02:48 pm
          PC800 Clutch Springs
          Fred, A little over a year ago. About 5-6K miles maybe. I'm wondering about how the temper of the S/S springs is compared to the standard spring steel if that is your concern. Time will tell. Ron --- In

            goldwingman40
            5/24/2007, 03:01 pm
            PC800 Clutch Springs
            Ron, That was what I was thinking. Years back, about 35, I had some special springs made for high temperature tooling that hooked to exhaust manifolds on engine test stands, the material was 18-8 stainless steel and I don't remember how 30

              eraffrenato
              5/24/2007, 03:06 pm
              PC800 Clutch Springs
              Hi all, I would like to buy a used wind screen for my '96 PC. Do you have by any chance one that you don't use? (even if scratched) Thanks, Emiliano

                rudyg1937
                5/24/2007, 06:37 pm
                PC800 Clutch Springs
                Probably the best bet is to watch eBay. They seem to go for around $100 to $140 on there. I just sold 2 of them on there and I have a Clearview coming for mine so I will have another but it also has a Laminar lip on it. I finally got a

              rwven6956
              5/24/2007, 03:14 pm
              PC800 Clutch Springs
              Fred, I changed the friction plates to Barnetts also. I did not want to but the first springs I ordered (from a parts dealer) were the wrong diameter and would not seat the clutch pressure plate properly. I took the bike for a fairly l

    michaeltjw
    5/24/2007, 03:19 pm
    PC800 Clutch Springs
    Since I got 100K out of the original springs I went with OEM and got them from Service Honda. My plates were glazed so I replaced them too. -----Original Message----- From: