Search Messages

 
Author:
Search Start Date:
Search End Date:
Sort Order
Sources to include:
OR Message ID:
 

Display Mesage #95179


How to change antifreeze on the PC800
Written by pwhite422000 on 7/21/2010 at 12:46 pm

I believe it is recommended that the washer be changed when draining the
anti-freeze. I got a new washer from Bike Bandit along with other parts when
changing mine. I put in Engine Ice and drove through some very hot weather last
month during a ride to Georgia and back.
Phil White
Ashburnham MA
1990 PC800

--- In ipcrc@yahoogroups.com, David Fuglestad <david_a_fuglestad@...> wrote:
>
> Rick,
>
> I just changed my fluid without removing any plastic. I didn't remove the
drain bolt all the way. I just opened it part way and let the fluid leak out
into a small bucket. You may want to remove the cover above the foot peg to
help you find the water pump if you don't know where it is. When looking at the
bottom of the bike there are a couple of overflow hoses that end right about at
the water pump drain bolt.
>
> You will have to get the fluid out of the overflow tank by some other means -
I siphoned mine.
>
> I used Honda pre-mix antifreeze to refill.
>
> Dave Fuglestad
> 1996 Honda PC800 "UnderDog"
> 1983 Honda GL650I "Mighty Mouse"
>

Message Thread for message #95179

rj.2000...
7/14/2010, 10:27 pm
How to change antifreeze on the PC800
Ok, I've searched with no luck, so forgive me if this is discussed elsewhere. The PC800 user's manual states that you should let a certified Honda mechanic change your antifreeze. I figure they are crazy. At the hourly rate they charge th

    rogerries
    7/20/2010, 10:16 pm
    How to change antifreeze on the PC800
    I did a search for antifreeze and found this on the first page. http://autos.groups.yahoo.com/group/ipcrc/message/94128 --- In

    spacetiger_j...
    7/20/2010, 11:29 pm
    How to change antifreeze on the PC800
    Just a suggestion since you may end up pulling bodywork off the bike to change the coolant. Take a moment to pull the thermostat and check its operation by putting it in a pan on the stove to verify it opens as it should. Jerry

      eriviere01
      7/20/2010, 11:51 pm
      How to change antifreeze on the PC800
      The owners manuel says to drain the fluid at the bottom bolt on the ater pump.It is located near the left foot peg From: Jerry Sent: Tuesday, July 20, 2010 6:29 PM To:

        gibinmich
        7/21/2010, 01:48 am
        How to change antifreeze on the PC800
        One of the bolts on the water pump has a visible brass washer. This is the one for draining the anti-freeze. Some guys pull the hose. I think you can get at it without removing any plastic. Don't just check the thermostat, replace it. If the

          david_a_fugl...
          7/21/2010, 02:45 am
          How to change antifreeze on the PC800
          Rick, I just changed my fluid without removing any plastic. I didn't remove the drain bolt all the way. I just opened it part way and let the fluid leak out into a small bucket. You may want to remove the cover above the foot peg to help

            pwhite422000
            7/21/2010, 12:46 pm
            How to change antifreeze on the PC800
            I believe it is recommended that the washer be changed when draining the anti-freeze. I got a new washer from Bike Bandit along with other parts when changing mine. I put in Engine Ice and drove through some very hot weather last month during

      obijuanak
      7/21/2010, 01:04 am
      How to change antifreeze on the PC800
      On Jul 20, 2010, at 15:29 , Jerry wrote: > > Just a suggestion since you may end up pulling bodywork off the bike to change the coolant. > > Take a moment to pull the thermostat and check its operation by putting it

    goldwingman40
    7/21/2010, 04:30 am
    How to change antifreeze on the PC800
    Rick, I always pull that hose off the fitting on the front of the water pump to drain it, it is fast without pulling any plastic. Just be carefull when loosening on the waterpump . I use nothing but Honda antifreeze, the cost is only sligh

    fatdaddyw1
    7/21/2010, 09:08 am
    How to change antifreeze on the PC800
    the water pump is located behind the kickstand,the lower rear bolt is a drain. I heard from Mac the best way to refill is to add a quart of antifreeze then start the bike, then add the rest. Best of luck --- In