Search Messages

 
Author:
Search Start Date:
Search End Date:
Sort Order
Sources to include:
OR Message ID:
 

Display Mesage #95992


wheel balancing
Written by alfr4d on 8/20/2010 at 01:49 pm

That is good news C. Now for the slow driving lady or guy that has a true
balancing problem and is able to solves that with those beads. Such has been
proven already (unless at great speed it works) but is nice to hear anyway.
Unbalancing a wheel without beads (biets) is not to difficult by the way. I am
going to try this, within 2000 miles, because the balancing weight in a tire is
lower as the lead on the rim. My new tire will probably have beads that you can
buy to fill teddy-bear. Are the pallets you described not light in weight,
yellow and 1/2 a cm wide? For a toy gun with a spring? Shooting this is not
allowed in Holland but I do have them here. It looks to be much to light in
weight and just could be .12 grams. Describe what you have got. - I remember
riding my small scooter and a child suddenly pointing such gun at me while his
father was buying a car, me braking and two cars behind me hit one another.
Everybody mad. - That is also a terrible big size. The teddy-bear filling is 1/3
to 1/2 as wide and I will take the bigger pearls out. I do not know the costs
because I had the bag for free. I have a permit to collect materials in garbage.
Alfred

--- In ipcrc@yahoogroups.com, csury@... wrote:
>
> I just changed my rear tire in the driveway a few days ago, installed a BF
Goodrich Radial TA 155/80-15 and balanced it using green plastic Crossman
Soft-Air BB pellets.
>
> The pellets were just $9 for 2,000 pellets, and at .12 grams per pellet, it
worked out to about 550 pellets to get about 2-1/4 ounces to balance the rear
tire. I fed the pellets into the tire between the rim and the tire bead after
spooning the tire on the rim, and before using air to seat the bead onto the
rim. If you go this route, just make sure you don't get any pellets stuck
between the tire bead and the rim.
>
> I thought it might have been snake oil at first, but it seems to work just
fine. The ride is perfectly smooth at highway speeds, and you don't hear the
pellets swirling around inside the tire. I'm happy with the results and will do
the same when I change out the front tire in a few weeks.
>
>

Message Thread for message #95992

pc800man...
7/11/2010, 04:10 am
wheel balancing
I am looking for info on the beads,balls or magic powder that you install in your tires to balance your wheels. The name of the product and a dealer name would be great.Thank you

    israel_96gtp
    7/11/2010, 04:12 am
    wheel balancing
    innovative balancing, dynabeads -------------------------------------------------- From: "pc800man@..." &

    ivyvet67
    7/11/2010, 04:38 am
    wheel balancing
    dyna beads Check ebay!! In a message dated 7/11/2010 12:11:25 A.M. Eastern Daylight Time, pc800man@... writes:

      douglasvanb
      7/11/2010, 06:39 am
      wheel balancing
      How well do those "magic beads" work anyway? The local independent shop charges me about $25/tire to mount and balanced a tire on a rim. It would be nice to be able to swap in and out my own tires when the need arises. Cheers,

        spacetiger_j...
        7/11/2010, 10:49 am
        wheel balancing
        Douglas, I have switched to these as the means to balance the tires. I first ran them on my GL500 and found they really work well. The best part is that you do not have to rebalance the tire for the life of the tire. It only takes 1 oz fo

          pc800va
          7/11/2010, 12:01 pm
          wheel balancing
          I'm considering the beads also. Jake Wilson has them pretty cheap, especially if you order your tires at the same time ( free shipping and $10 or $20 off ). I was going to carefully empty the bag of beads into the tire before the bead

        pgboyd
        7/11/2010, 12:39 pm
        wheel balancing
        I tried to use them on my Kawasaki police bike and gave up. It's a bit of a pain to get the dynabeads in the valve stem. On the PC, it would be next to impossible. You'd probably just need to dump them inside the tire while you're mounting it

        eegah_yai
        7/11/2010, 01:13 pm
        wheel balancing
        The beads seemed to work pretty good for me, although my tires, before using the beads, weren't that out of balance. I used them on two bikes- one with tubes and one without. I didn't notice a difference between the beads and weights. I stopp

          pc800va
          7/11/2010, 04:27 pm
          wheel balancing
          Mike, Thanks for posting that link to the WebBikeWorld balancer review. Which model balancer did you get? The Marc Parnes site has one for Honda but I'd rather get the universal to use on other bikes too. > I had

            gibinmich
            7/11/2010, 04:52 pm
            wheel balancing
            I use two jack stands. Clean the axle, spin the wheel, stick on the weights. Presto! --- In ipcrc@yahoogroups.com,

            troy.ohio_pc800
            7/11/2010, 09:10 pm
            wheel balancing
            The No-Mar brand balancer comes with a stand which makes it very convenient. I believe it's only $100 + shipping and I've always been happy with the results.

            eegah_yai
            7/12/2010, 05:33 am
            wheel balancing
            I got the universal model- fits a PC800, CB250, and a Suzuki V-Strom so far. I really like it- I used to use the bike axles suspended on kitchen chair backs or identical 5 gallon buckets. It is a quality item- follow the directions and don't

        kf4pzz
        7/11/2010, 05:49 pm
        wheel balancing
        I talked to a local motorcycle tire dealer that is an authorized Dynabead dealer and he told me that when they work they work great but if you get moisture in the tire they sometimes clump and will cause a very rough ride. He runs them on one

        randiana46128
        7/11/2010, 07:47 pm
        wheel balancing
        --- In ipcrc@yahoogroups.com, "douglasvanb" <douglas.vanbossuyt@...> wrote: > > How well

          sr139fox
          7/12/2010, 01:19 am
          wheel balancing
          I did this same process, but I clamped the end of the axle in my workmate and put a 2X4 cut to the correct height on the other end to keep the axle level. Might have to do a set up without the wheel on the axle to get the correct height of t

    alfr4d
    7/12/2010, 07:05 pm
    wheel balancing
    http://www.dynabeads.co.uk 14,10 Pound 1 x 1oz Bag 1 x 2oz Bag 1 x Instructions - excl. shipping. 1 oz for front and 2 oz for back but only just. Put some less in back and some more up front. Dy

    shotcoy
    7/12/2010, 11:44 pm
    wheel balancing
    I use airsoft BB's to balance my tires. See the photo in PC800 Darksider called balancing bb's. I purchased the heaviest, hardest, and most durable ones that I could find. They are made by TSD Tactical, are 6mm(about .24 caliber) and weigh

    csury
    8/20/2010, 04:33 am
    wheel balancing
    I just changed my rear tire in the driveway a few days ago, installed a BF Goodrich Radial TA 155/80-15 and balanced it using green plastic Crossman Soft-Air BB pellets. The pellets were just $9 for 2,000 pellets, and at .12 grams per pel

      alfr4d
      8/20/2010, 01:49 pm
      wheel balancing
      That is good news C. Now for the slow driving lady or guy that has a true balancing problem and is able to solves that with those beads. Such has been proven already (unless at great speed it works) but is nice to hear anyway. Unbalancing a w

        csury
        8/20/2010, 03:50 pm
        wheel balancing
        The BB pellets are about 6 mm in diameter, plastic, weigh .12 grams each, and are sold for guns that shoot with compressed air or CO2 cartridges. I guess they would also work in spring-loaded toy guns. Mine are green, but I've seen similar so

      shotcoy
      8/21/2010, 01:36 am
      wheel balancing
      csury: Thanks for the report on wheel balancing and the car tire. Did you have any trouble seating the bead on the car tire? How many psi did it take to seat the bead? Glad to hear you are enjoying a smooth ride. Enjoy fun & safe riding!

        csury
        8/21/2010, 03:12 am
        wheel balancing
        Seating the bead was the toughest part of the whole exercise. The tire had no problem holding air and inflating, but a foot-long part of the tire bead on each side of the tire just didn't want to pop over the bead seating hump on the inside o

          shotcoy
          8/22/2010, 03:59 am
          wheel balancing
          csury: It sounds like wisdom, good judgement, perseverance, and patience paid off in your attempts to seat the bead on your car tire. Mine seated at 71 psi(after attempts at 50 & 60 psi had failed). There are many "tricks" you can

        jwswingle
        8/22/2010, 12:59 pm
        wheel balancing
        I'm no chemist, but Pinesol may cause damage to the rubber long term. It's name says it all, it uses some of the solvent qualities of pine tar/turpentine as part of its charms-and I keep Hydrocarbon chemical solvents away from my tires. KY so

          pc800va
          8/22/2010, 03:27 pm
          wheel balancing
          If you know an electrician, ask for a handful of wire-pulling lube. It's water soluble and safe on plastic & rubber (like wire insulation). Some are snot-clear others yellow and blue. Also good for de-mounting.

          mkerr
          8/23/2010, 06:28 pm
          wheel balancing
          My personal favorite is Tire Slick (from tireslick.com). It works well and a gallon will probably last a lifetime. Plus they sell the applicators tire professionals use, which makes putting slick on the tire and rim at the same time a snap.