Honda Pacific Coast ipcrc Archives

Title and Body Title Only	All Words Any Word Phrase
Author:
Search Start Date:
Search End Date:
Sort Order	Newest Posts First Oldest Posts First
Sources to include:	Both Yahoo Groups and List Server Only Yahoo Groups Only Older List Server
OR Message ID:

Progressive Springs, worth it?
Written by stanwalton... on 10/6/2010 at 03:56 pm


Thanks guys,

I think that after reviewing the input from everone here on the board,
Progressive Springs are a go..
I just went to the Progressive board and posted an email as to how many springs
are in a kit.. They are not to clear on that point.. Waiting or their reply.

Also,it seems that 10wt fork oil is the right weight..
Can't wait to get it back together, the weather is perfect.

Thanks,
Stan
--- In ipcrc@yahoogroups.com, "goldwingman40" <goldwingman@...> wrote:
>
> Jerry,
> Install them like they say in the instructions and unless you weigh 300 pounds
you will not have any problems. They will not bottom out on anything stort of
riding off a cliff. Use 10 wt. fork oil.
> Fred
>
>
>
>
>
> --- In ipcrc@yahoogroups.com, "Jerry" <sanae.ej@> wrote:
> >
> > If you swap springs, you should still set up the proper amount of preload
for your riding weight. If you do not, you could still bottom out (depending on
what you weigh).
> >
> > Jerry
> >
> > --- In ipcrc@yahoogroups.com, "goldwingman40" <goldwingman@> wrote:
> > >
> > > Stan,
> > > They are a very good improvement in handling and stability of the frontend
and eliminate it bottoming. I have had them I my 89 PC since I got it in 94. I
also had them in my 85 GL1200 and have them in my 92 GL1500. The only other
thing that helps the frontend stability is the installation of tapered roller
steering head bearings in place of the ball bearings.
> > > Fred
> > >
> > >
> > >
> > >
> > >
> > > --- In ipcrc@yahoogroups.com, "STANLEY" <stanwalton@> wrote:
> > > >
> > > > Hi,
> > > > I'm just about to open and dump the fork fluid from the forks on my 97PC
(15k miles) and would like to get the most for my efforts.(Thanks to the
knowledable people on this board, else it wouldn't have been possible)
> > > >
> > > > I read post about using progressive springs and wondered what are the
pros and cons of installing them at this time.. This question is directly tied
to the effort to remove and reinstall the forks..
> > > >
> > > > Thanks,
> > > > Stan
> > > >
> > >
> >
>