Search Messages

 
Author:
Search Start Date:
Search End Date:
Sort Order
Sources to include:
OR Message ID:
 

Display Mesage #97853


OEM Hondaline HWY Boards
Written by goldwingman40 on 10/11/2010 at 02:23 pm

Dave,
They are all good welds if they don't fall off!!!!
Fred



--- In ipcrc@yahoogroups.com, "revconprince" <daveinet@...> wrote:
>
> I fabbed the mounts. It is 2 3/4" square bar stock welded to the crash bar
frame. I then welded a plate to screw the HWY board to. It was a bit of a trick
getting the board on the right angle. Took a lot of tack welding, twisting,
breaking and re-welding to get the angle right. Once I got the angle, I pulled
the crash bar to do the real weld. Don't really want to show too detailed shot
of the mount - then you would all know how poorly I weld.
>
> I never liked the chrome HWY bars. They just didn't look right on the bike.
Bars are not that comfortable. Was surfing Ebay, and discovered people were
selling rear passenger boards, which gave me the idea. Found a set for 25 bucks.
Re-painted them and the rest is history.
>
> Now I just need to figure out how to get a driver's back rest.
> Dave
>
> --- In ipcrc@yahoogroups.com, "Jerry" <sanae.ej@> wrote:
> >
> > post a pic of the brackets - did you fab them or have them made? They look
good...
> >
> > Jerry
> >
> > --- In ipcrc@yahoogroups.com, "revconprince" <daveinet@> wrote:
> > >
> > > Yep, sure as my bike was made by Tupperware, Honda made HWY boards for the
PC800.
> > > http://groups.yahoo.com/group/ipcrc/photos/album/1948188970/pic/list
> > >
> > > Dave
> > >
> >
>

Message Thread for message #97853

revconprince
10/10/2010, 02:24 am
OEM Hondaline HWY Boards
Yep, sure as my bike was made by Tupperware, Honda made HWY boards for the PC800. http://groups.yahoo.com/group/ipcrc/photos/album/1948188970/pic/list Dave

    spacetiger_j...
    10/10/2010, 02:45 am
    OEM Hondaline HWY Boards
    post a pic of the brackets - did you fab them or have them made? They look good... Jerry --- In ipcrc@yahoogroups.co

      revconprince
      10/11/2010, 02:56 am
      OEM Hondaline HWY Boards
      I fabbed the mounts. It is 2 3/4" square bar stock welded to the crash bar frame. I then welded a plate to screw the HWY board to. It was a bit of a trick getting the board on the right angle. Took a lot of tack welding, twisting, breaki

        goldwingman40
        10/11/2010, 02:23 pm
        OEM Hondaline HWY Boards
        Dave, They are all good welds if they don't fall off!!!! Fred --- In ipcrc@yahoogroups.com, "revconpri

          spacetiger_j...
          10/11/2010, 07:16 pm
          OEM Hondaline HWY Boards
          Just put a little bondo on them, sand and paint. Who knows... Jerry --- In ipcrc@yahoogroups.com, "goldwingma

            revconprince
            10/17/2010, 11:56 pm
            OEM Hondaline HWY Boards
            Had a request to estimate the angles of the mounts. After some thought, I concluded that the was a way to supply the info. I took some photos with the bike on the center stand. The photo references a T-square, so it is perfectly perpendicular

    skytoptrading
    10/10/2010, 03:26 am
    OEM Hondaline HWY Boards
    --- In ipcrc@yahoogroups.com, "revconprince" <daveinet@...> wrote: > > Yep, sure as my bike