Honda Pacific Coast ipcrc Archives

Title and Body Title Only	All Words Any Word Phrase
Author:
Search Start Date:
Search End Date:
Sort Order	Newest Posts First Oldest Posts First
Sources to include:	Both Yahoo Groups and List Server Only Yahoo Groups Only Older List Server
OR Message ID:

Cam seal replacement
Written by pc800dork on 10/15/2010 at 07:40 pm

You can install the cam seals without removing the head by levering them in to
the holes. I did it. It wasn't pretty and it wasn't easy - foul words aplenty.
But... it got done and it doesn't leak. Probably took me more time to do that
then a pro would take removing the heads.

Mind you - I did it in my gravel driveway, on a moving blanket. FUN!

If the god-forsaken cam plugs ever leak again, I'm going to try rubber freeze
plugs instead. It has not been done (yet) and is a source of ridicule, but
(IMO) if the plugs were shallow enough, it would be a hell of a lot easier to
install them than cam plugs. (Just my thoughts).

I hope I NEVER have to do them again.





--- In ipcrc@yahoogroups.com, "unlikelyloginname" <unlikelyloginname@...> wrote:
>
> Bob,
>
> Mere Mortals have tackled both cam seal and stator replacement, sometimes
under less than ideal circumstances like a motel parking lot. The two projects
are quite unrelated. (Draining the oil is a prerequisite for both.) If you
budget a day for each you may be pleasantly surprised. A torque wrench should
be available, particularly for working on the cylinder heads. That's the most
exotic tool you should need.
>
> The cam seals are hard to get at. That accounts for why the mechanic doesn't
want to go there. Some Tupperware, the air box, carburetors, engine shroud and
some oil and coolant plumbing need to be removed. Fairly straightforward
wrenching with the odd bit of fun. (How did they pour the engine into the
shroud?) As long as you don't drop parts inside the head you shouldn't need to,
um, express yourself verbally. Do make sure that you have all of the O-rings,
seals, gasket and fiddly bits before starting.
>
> The stator is a simpler project. The primary nuisance is cleaning off the old
gasket on the left crankcase cover.
>
> Haven't done the clutch on a PC. Have done it (repeatedly) on 'oldWing. A
brief look at the PC Service Manual doesn't seem to show any challenges. Just
another gasket to scrape. (The Wing requires a Special Service Tool to remove
the clutch pack. It can be made in an hour or so from a 12-point socket using a
Dremel and files.) May as well do it while you have the oil drained.
>
> You can yell across the lake if you get stuck. You'll need a passport for a
consultation at Tony Packo's.
>
> Somewhere near Cleveland, Ohio,
> Seth
>