Search Messages

 
Author:
Search Start Date:
Search End Date:
Sort Order
Sources to include:
OR Message ID:
 

Display Mesage #99721


Can't find a clutch push rod seal
Written by aayjayhod3 on 1/2/2011 at 12:20 am

Let's try this again.

First view is the best....
http://www.directcon.net/lcshepp/PC800SMPage9-4.html

Second view... http://www.directcon.net/lcshepp/PC800SMPage15-8.html

--- In ipcrc@yahoogroups.com, "aayjayhod3" <aayjayhod3@...> wrote:
>
> Hey Doug,
>
> This is the best view of this oil
seal....http://www.directcon.net/lcshepp/PC800SMPage9-4.html
>
> You can see the clutch push rod sticking out of the crank case cover just to
the right of the insulator part no. 7. That seal labeled No. 11 goes into the
body of the slave cylinder itself. That one too is damaged and I already have
it on order.
>
> Here's another view of that seal. It's on the crank case cover in between the
three retainer bolts for the clutch slave cylinder
assembly.....http://www.directcon.net/lcshepp/PC800SMPage15-8.html
>
> I did locate a micro fishe set of diagrams online. But they too neglect to
list that seal.
>
> A.J.
>
> --- In ipcrc@yahoogroups.com, "douglasvanb" <douglas.vanbossuyt@> wrote:
> >
> > Hi A.J.,
> >
> > It isn't 22865-MB0-003 is it? Or maybe 91209-MB0-003 ? Both of those part
numbers are from the Left Crankcase Cover microfiche.
http://www.directcon.net/lcshepp/PC800PLPageC9.html
> >
> > Otherwise do you have a photo of the part and where it goes exactly?
> >
> > Cheers,
> >
> > Douglas
> >
> > --- In ipcrc@yahoogroups.com, "aayjayhod3" <aayjayhod3@> wrote:
> > >
> > > Happy New Year to all of you.
> > >
> > > A little while ago I talked about having to change out my stator in order
to get my charging system back on line. The stator change worked thanks to
someone who mentioned Ricks Motorsport Electric. However, after swapping the
stator out I noticed that I had a lot of oil leaking from the clutch slave
cylinder. When I removed the slave cylinder to investigate I found that the
large oil seal in the left crankcase cover was damaged.
> > >
> > > I had always had a seep type leak. But I never knew where it was coming
from. It may be that in removing and replacing the cover I may have opened up a
damaged seal a little more.
> > >
> > > Here's the problem, the seal isn't listed in the parts diagrams online.
You can see it detailed but not listed. And, I can't find this seal anywhere.
> > >
> > > It's about 1" in dia., about 1/4" thick and accomodates the push rod shaft
that measures about 3/16" dia. It's an easy press fit from the inside of the
crankcase cover.
> > >
> > > Does anyone know if there is a part number and/or where to get a
replacement?
> > >
> > > Thanks,
> > >
> > > A.J.
> > >
> >
>

Message Thread for message #99721

aayjayhod3
1/1/2011, 11:00 pm
Can't find a clutch push rod seal
Happy New Year to all of you. A little while ago I talked about having to change out my stator in order to get my charging system back on line. The stator change worked thanks to someone who mentioned Ricks Motorsport Electric. However, a